Table of Contents
Advertisement
Step 24. Reinstall the bolt securing transmission to rear mower housing.
Step 25. Pivot the baffle back to its original position and secure with three hex screws earlier removed. You will
need a 3/8" socket for these screws.
Step 26. Lightly lubricate the inside of the blade adapter and reinstall the spacer, wave washer, blade adapter
assembly and the blade in the correct order.
Step 27. Tighten the hex bolt to secure the blade. Follow recommended torque: 450-600 in. lbs.
SECTION 11: LUBRICATION
A
WARNING:
Always stop engine and disconnect spark plug wire before) cleaning, lubricating or doing
any kind of service work on the lawn mower.
Figure 14
21
Advertisement
Table of Contents
