Table of Contents
Advertisement
Set-Up
Super Sprint
6. Tighten the two wing nuts underneath the display
enclosure.
7. To return the display enclosure to the shipping (for¬
ward) position, reverse the order of these steps.
Control and Switch Locations
The following control and switch descriptions are for
both the U.S. and the Irish versions of the Super Sprint
game. See Figures 1-1 and 1-3 for the illustrations showing
the locations of the controls and switches,
Power On/Off Switch
The power on/off switch is located at the bottom rear of
the cabinet. (See Figure 1-1.)
Volume Control
The volume control is located opposite the coin door on
the Audio II PCB on the inner cabinet wall. The volume
control adjusts the level of sound produced by the game.
Coin Counter
The coin counter is located opposite the coin door on the
inner cabinet wall below the Audio II PCB. The coin
counter records the number of coins deposited.
Self-Test Switch
The self-test switch is located behind the coin door on
the Audio II PCB. The self-test switch selects the Self-Test
Mode to check game operation. Refer to Chapter 3 for a
complete description of self-test operation.
Coin and Game Option Settings
The Super Sprint cabinet has two dual-in-line package
(DIP) option switches located on the CPU printed circuit
board (PCB).
• The option switch at location 6/7A is used for selecting
coin options.
• The option switch at location 5/6A is used for selecting
game options.
The coin and the game option settings are displayed in
the Self-Test Mode. Refer to the Switch Settings section in
Chapter 3 for information on the coin and credit option
settings, and the game option settings. This section also
provides the default (recommended) settings and the pro¬
cedure for selecting the options.
Button-Head Screw
Playing Position
Wing Nut
Shipping Position
Figure 1-2 Moving the Display Enclosure into Position
1-6
Advertisement
Table of Contents
