Page 1
User Manual User Manual Manufactured for Tria Beauty by Device Name: Intense Pulsed Light (IPL) System Device Name: Intense Pulsed Light (IPL) System Device Name: Intense Pulsed Light (IPL) System Shenzhen Fansizhe Science And Technology Co., Ltd. Model: T001A Model: T001A Version: V1.3...
• 1.Safety Instructions • Warning the user manual carefully. DO NOT • Warning • • • • Please check the device before you start using it. DO NOT use it if there is any • damage. should not use this device on the scrotum or face. •...
Page 4
ALWAYS DO NOT This is not a toy,.The charging cord could lead to strangulation. DO NOT Water and electricity are a dangerous combination! To avoid risk of electrocution. DO NOT manufacturer. DO NOT use the device after sunbathing. or storage of your device in such environments. ensure the continued safe use of the device.
Power Adaptor (picture 2): 3. Device Description The Intense Pulsed Light (IPL) System is a device for hair removal based on 3.1. General Information Device Name: Intense Pulsed Light (IPL) System Model: T001A 3.2. Indications for Use...
Page 6
3.3.3. Introduction of Display Screen 3.3.2. Confi guration of Main unit Status of Flash Graphical When Ready Light representation 1. When in “Manual Emit Flash mode,” this indicates that the device probe is not in full contact with the skin. Light on steady 2.
Page 7
Picture 4: Device Probe Press and hold the button “ ”to power on or power off Plug the device DC plug-in port • Powering Off: DC output connector • Intensity Level Adjustment: increase the intensity level. (Picture 6)Picture 6 Level 1 Level 2 Level 3 Level 4...
Page 8
• Manual Emit Flash Mode: Notes: 1) In “Manual Emit Flash mode”, if the device probe is not in full contact with (1) When the device is Powered On, it will automatically enter “Manual Emit Flash the skin, the Flash Ready Light will be on, but not blink, and the device will not emit mode”.
Page 9
2) Once the Light Exit Window is close to the skin, the flash is continuously • Mode switch: If the device is on and in “Manual Emit Flash mode”, press and triggered for 8 seconds, after which the Flash Ready Light will be blinking and hold the Flash Button “...
4.3. Suggestions for Use Beige device. • Treatment areas Suitable for smaller areas such as underarms and larges areas such as arms • Treatment time HAIR COLOUR: • Skin tone/hair color reference chart SKIN Tone: Skin tone table: Tone Safety grade White to light beige...
Page 11
4.4. Steps for Use • Press the device probe against the skin, ensuring that the device probe is fully in contact with the skin (Figure 11). Wait for a few seconds and when the Flash • Before you start using the device, use a razor or trimmer to shave all hair on the Ready Light starts blinking, press the Flash Button to trigger the fl...
Cleaning Agent: Method of Cleaning: To thoroughly clean the device after each use, rub the • Burns, abnormal redness, and swelling These reactions are very rare. They may be caused by using a high flash intensity. If these adverse reactions continue for 3 days or more, immediately Note: •...
. T h e f l a s h hairs from the skin area you burns the hair causing 8. Recycling an odd smell. high. reduce it and contact Tria Beauty using the device. istance. 9. Warranty & Support Please read the instruction manual, Warnings • Troubleshooting mentioned.
Page 14
Device Name Intense Pulsed Light (IPL) System If your hair is blond, red, Model T001A The treatment results color are not suitable for Dimension are not satisfactory. tone is very dark, do not use this device.
Page 15
device is too high.Please restart device after 10 minutes. environment condensation Item Parameters GJ48WA-2400200DP Shenzhen Guijin Technology Co., Ltd 10 years 12. Frequently Asked Questions...
Page 16
Warning: to your actual situation. Table 1 Guidance and Manufacturer’s declaration – electromagnetic emission environment. Electromagnetic environment – Emission test Compliance smell of scorched hair. This is normal. guidance likely to cause any interference in 13. Important Information Regarding Electro The device is suitable for use in all establishments, including domestic Magnetic Compatibility (EMC)
Page 17
Electromagnetic IEC 60601-1-2 Compliance Immunity test environment- test level level guidance 6V in ISM bands disturbances concrete or ceramic (Professional ±2kV, ±4kV, healthcare facility discharge environment), material, the relative 6V in ISM and humidity should be at amateur radio 3V/m 10V/m (Professional healthcare facility...
Page 18
Test Maximum Immunity Band Distance should be that of a frequency Service Modulation power Test Level (V/m) or a Professional Pulse cycle Single modulation healthcare facility environment... Voltage 430 – 470 cycle sine Pulse NOTE: modulation 13, 17 Table 3 Pulse Guidance and Manufacturer’s declaration –...
Page 19
Operation Record Operation Record Level: Level: ______________ ____________ ______________ ____________ Date Remark Date Remark Table 4 Recommended separation distances between portable and mobile RF communication equipment and The device the device as d = 1.2 d = 1.2 d = 2.3 transmitter/ W.
Page 20
Operation Record Operation Record Level: Level: ______________ ____________ ______________ ____________ Date Remark Date Remark Operation Record Operation Record Level: Level: ______________ ____________ ______________ ____________ Date Remark Date Remark...
Need help?
Do you have a question about the T001A and is the answer not in the manual?
Questions and answers