Smeg DWAI152XT Instruction Manual page 20

ENERSAVE
At the end of the drying cycle, a special device automatically releases
the door, which opens slowly and smoothly by a few centimetres. This
ensures perfect drying and greater control of rinsing temperatures.
Once the door has opened, the dishwasher emits a short. The option is
activated by pressing key and the relative light illuminates to indicate
its activation.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.
"Flexi Tabs"
The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as, "triple action", etc. With this
option activated, any salt and rinse aid If you wish to use detergents
which already contain salt and rinse aid already in the dishwasher will
not be used.
-
IMPORTANT: when no longer required, the option must be disabled
(the light goes out).
If the water hardness has been set on a value above H3, and the "Flexi
Tabs" option is activated, the relative light flashes, warning of a setting
error. This products are not suitable for use with very "hard" water; this
does not prevent the use of the option, but the washing results might
not be of the best.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
18
User instructions
N.B.: even with the "Flexi Tabs" option selected, the
regenerating salt/rinse aid lights will still stay on if their
containers are empty.