Rapidline ETERNITYLEGCWS Assembly Instructions Manual

Assembly Instructions: Assembly Instructions:
Eternity Leg Corner Workstation Product Code : ET20 BK
Product Name: ET20 Operator Chair
Time Required:
Time Required:
30-45 minutes
10 minutes
Tools Required:
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Skill Required:
Skill Required:
Easy
Easy
The Assembly Skill Rating is a 5-point system that shows the degree of e ort needed in assembling
a speci c product. With 1 being easy for the average person and 5 requiring an expert.
The Assembly Skill Rating is a 5-point system that shows the degree of e ort needed in assembling
For most products, two persons are recommended.
a speci c product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.
Please note, as this is a commercial product, some intermediate skills are required.
*No pre-drill holes or markings are provided on tops.
Please note, as this is a commercial product, some intermediate skills are required.
*No pre-drill holes or markings are provided on tops.
• As this is a commercial product, some intermediate skills may be required. • As this is a commercial product, some intermediate skills may be required.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, • If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item,
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched. • Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble • Remove all wrapping materials, including staples and packing straps before you start to assemble
• Do not use this product unless all bolts and screws are rmly secured and tightened. • Do not use this product unless all bolts and screws are rmly secured and tightened.
• If parts are missing, broken, damaged or worn stop using the product until all repairs are made. • If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
Hard
Hard
• No pre-drill holes or markings are provided on our table or desk tops. • No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling. • Please check you have all hardware before assembling.
required hardware part and quantity. required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty. • Please retain your receipt as proof of purchase to validate your warranty.
• Keep all hardware parts out of reach of children. • Keep all hardware parts out of reach of children.
• Heavy product. Do not attempt to lift or move without help • Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled. • Do not tighten screws and bolts until completely assembled.
• Failure to follow these warnings could result in serious injury. • Failure to follow these warnings could result in serious injury.
NOTE NOTE
CAUTION CAUTION
WARNING WARNING