KitchenAid KSRS22Q Use And Care Manual page 19

Changing the light bulbs
ik WARNING
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect the
electricity leading to the refrigerator at
the main power supply.
Failure to do so could result in personal
Injury or electrical shock.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind Control Console to remove
bulb.
3. Remove bulb and replace with a 40-watt
tubular appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper light:
1. Disconnect refrigerator from power supply.
2. Remove crisper and cover. (See page 11.)
3. Remove bulb and replace with a 40-watt
appliance bulb.
4. Reconnect refrigerator to power supply.
To change upper freezer light:
(KSRS25Q and KSRB25Q)
1. Disconnect refrigerator from power supply.
2. Remove light shield by pulling top of shield
forward.
3. Remove bulb and replace with a 40-watt
appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
To change lower freezer light:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Remove bulb and replace with a 40-watt
appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
19