Advertisement
Quick Links
INSTRUCTION MANUAL
STExCP8-BG-I, STExCP8-BG-IR
Intrinsically Safe Call Point
Class I Div 1 ; UL60947
NEC / CEC / ATEX / IECEx / UKEx Zone 0, 1, 2
1) Product Table
2) Warnings
WARNINGS:
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
DO NOT OPEN WHEN ENERGISED
ELECTROSTATIC CHARGING HAZARD – CLEAN ONLY WITH A DAMP CLOTH.
AVERTISSEMENT:
NE PAS OUVRIR UN PRESENCE D'ATMOSPHERE EXPLOSIVE
NE PAS OUVRIR ENERGIE
DANGER POTENTIEL CHARGE ÉLECTROSTATIQUE - NETTOYER UNIQUEMENT AVEC UN CHIFFON HUMIDE
_______________________________________________________________________________________________________________________________
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D204-00-501-IS
Unit Type Code
Ui
Ii
STExCP8-BG-I
Pi
Ci
STExCP8-BG-IR
Li
Table 1: Electrical Ratings
Issue 1
28-01-2024
STExCP8-BG
Input Parameters
=
30V
=
500mA
=
1100mW
=
0
=
0
www.e2s.com
Sheet 1 of 10
Tel: +44 (0)208 743 8880
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for E2S STExCP8-BG
Summary of Contents for E2S STExCP8-BG
- Page 1 INSTRUCTION MANUAL STExCP8-BG-I, STExCP8-BG-IR Intrinsically Safe Call Point Class I Div 1 ; UL60947 NEC / CEC / ATEX / IECEx / UKEx Zone 0, 1, 2 STExCP8-BG 1) Product Table Unit Type Code Input Parameters 500mA STExCP8-BG-I 1100mW STExCP8-BG-IR...
- Page 2 3) Marking & Rating Information Epsilon x II 2G Equipment Group II 2D The STExCP8-BG Call Points comply with the following standards for and Category: hazardous locations: CE Marking and 2813 Class/Division Ratings for US & Canada Notified Body No.
-
Page 3: Location And Mounting
Temperature Classification for Gas Applications weight of the unit. To gain access to the mounting holes in the base the front cover must be removed. See Section 7 100ºC (STExCP8-BG-I) only 85ºC (STExCP8-BG-I) only Equipment Category Equipment Protection Level Ga, Gb, Gc Ambient Temperature Range -55°C to +70°C (-67°F to +158°F) ATEX/IECEx/UKEx... -
Page 4: Power Supply Selection
80ºC and therefore suitable heat resisting cables and cable glands must be used, with a rated service temperature of at least the values stated below: For models STExCP8-BG-I: Max. ambient temperature ºC External Earth M5 Terminal req. - Page 5 For EOL and Series device limitations and configurations see For model STExCP8-BG-I: Section 15. Fitting can be requested by E2S at the order stage or added to the correct terminal blocks afterward. All Max.
- Page 6 For EOL and Series device limitations and configurations see position. The glass element should now raise up so it is level Section 15. Fitting can be requested by E2S at the order again (horizontal) in the viewable window. stage or added to the correct terminal blocks afterward. All devices must comply with the requirements stipulated in section 15.
- Page 7 See section 12 of this instruction manual. 14) End-of-Line and Series Devices All STExCP8-BG-IR models can be fitted with series / end-of- line monitoring resistors, monitoring diodes and Zener and also LED options into the terminals of the units with the PCB terminal option.
- Page 8 Failure to open a contact when the call point is struck with specified force Spurious output despite no input _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-501-IS Issue 1 28-01-2024 Sheet 8 of 10...
- Page 9 Fig. Single stage call point alarm using single galvanic isolator. Fig. Single stage call point alarm using single barrier. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-501-IS Issue 1 28-01-2024...
- Page 10 Ccable = 60 pF/ft., Lcable = 0.2 μH/ft. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-501-IS Issue 1...
- Page 11 WRITTEN CONSENT. STANDARDS MANSELL ROAD ACTON DRAWING NUMBER GNExCP7-I and STExCP8-I units EUROPEAN SAFETY SYSTEMS LTD. SCALE SHEET ALTERNATIVE MATERIAL LONDON W3 7QH APPROVED DATE AS PER LATEST DATE OF ISSUE SHOWN ABOVE with DIN Rail D202-06-501 02-02-2024 R.N.POTTS WWW.E2S.COM...
- Page 12 B.ISARD WRITTEN CONSENT. STANDARDS MANSELL ROAD ACTON GNExCP7-IR and DRAWING NUMBER ALTERNATIVE MATERIAL EUROPEAN SAFETY SYSTEMS LTD. SCALE SHEET LONDON W3 7QH APPROVED DATE STEXCP8-IR units AS PER LATEST DATE OF ISSUE SHOWN ABOVE D202-06-502 with PCB 02-02-2024 WWW.E2S.COM R.N.POTTS...
- Page 13 B.ISARD WRITTEN CONSENT. STANDARDS MANSELL ROAD ACTON GNExCP7-IR and DRAWING NUMBER ALTERNATIVE MATERIAL EUROPEAN SAFETY SYSTEMS LTD. SCALE SHEET LONDON W3 7QH APPROVED DATE STEXCP8-IR units AS PER LATEST DATE OF ISSUE SHOWN ABOVE D202-06-502 with PCB 02-02-2024 WWW.E2S.COM R.N.POTTS...
- Page 14 B.ISARD WRITTEN CONSENT. STANDARDS MANSELL ROAD ACTON GNExCP7-IR and DRAWING NUMBER ALTERNATIVE MATERIAL EUROPEAN SAFETY SYSTEMS LTD. SCALE SHEET LONDON W3 7QH APPROVED DATE STEXCP8-IR units AS PER LATEST DATE OF ISSUE SHOWN ABOVE D202-06-502 with PCB 02-02-2024 WWW.E2S.COM R.N.POTTS...
- Page 15 B.ISARD WRITTEN CONSENT. STANDARDS MANSELL ROAD ACTON GNExCP7-IR and DRAWING NUMBER ALTERNATIVE MATERIAL EUROPEAN SAFETY SYSTEMS LTD. SCALE SHEET LONDON W3 7QH APPROVED DATE STEXCP8-IR units AS PER LATEST DATE OF ISSUE SHOWN ABOVE D202-06-502 with PCB 02-02-2024 WWW.E2S.COM R.N.POTTS...
-
Page 16: Eu Declaration Of Conformity
This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-116_Issue_A Quality Assurance Manager Date and Place of Issue: London, 29/02/2024 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-116_Issue_A - Page 1 of - QAF_252_Issue_5... - Page 17 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-118_Issue_A Quality Assurance Manager Date and Place of Issue: London, 29/02/2024 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-118_Issue_A - Page 1 of 1 - QAF_252_Issue_5...
Need help?
Do you have a question about the STExCP8-BG and is the answer not in the manual?
Questions and answers