Samsung WW9 D Series User Manual page 24

Installation
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is connected
properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before
inserting the tap into the adaptor.
For models with an additional hot water inlet:
Check valve (applicable models only)
Aqua stop hose (applicable models only)
A
NOTE
The end of the aqua stop hose must be fitted to the water tap and not the machine.
24 English
Untitled-5 24
1. Connect the red end of the hot water hose to the
hot water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the
hot water tap.
Before connecting the water hose to a water tap,
connect the supplied check valve to the water tap and
then connect the water hose.
The aqua stop hose alerts users of a risk of water
leaks. It senses the water flow and turns red on the
centre indicator (A) in case of a leak.
2023-12-13 1:33:03