Yamaha EXCITER 2024 Owner's Manual page 34

Instrument and control functions
Tripmeters
5
1
1. Tripmeter
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and then push the "RESET/SELECT"
button until it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
EAU88060
Clock
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Push the "RESET/SELECT" but-
ton until the hour digits start flash-
ing.
2. Use the "RESET/SELECT" button
to set the hours.
3. Push the "RESET/SELECT" but-
ton until the minute digits start
flashing.
4. Use the "RESET/SELECT" button
to set the minutes.
5. Push the "RESET/SELECT" but-
ton until the minute digits stop
flashing. The setting is confirmed.
EAUN2960
TIP
If you do not push the "RESET/SE-
LECT" button to confirm the setting
within 90 seconds, the clock will not be
set and will return to the prior time.
Instantaneous
display
1
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km". To switch the fuel con-
sumption measurement units, push the
"RESET/SELECT" button until the
measurement units change.
 "km/L": the distance that can be
5-5
fuel consumption
traveled on 1.0 L of fuel.
EAU87750