GE 42179 User Manual page 38

Indoor amplifier installation
1. Connect a coax cable from your antenna to the ANTENNA
on the amplifier. For best results, keep the cable between
the antenna and amplifier as short as possible.
2. Place the amplifier in your desired location. Use the slotted
holes at the top of the amplifier to attach to wall.
3. Connect a coax cable from the TV/POWER on the amplifier
to the input of the power inserter.
4. Connect the coax cable pre-attached to the power inserter
to the HDTV.
5. Connect the power supply plug to the power inserter.
6. Plug the power supply into an AC wall outlet. The lighted red
LED confirms that power is correctly applied.
7. SCAN FOR CHANNELS ON YOUR HDTV.
This step is very important. Your HDTV will NOT receive
signals from your antenna without completing this step.
See your TV's menu for this process. You can also refer to
the TV instruction manual for detail instructions.
Note: It is important to repeat this process and re-scan for
channels anytime you move or reposition your antenna.
Questions? Contact us at 1-800-654-8483 between
7:00AM—8:00PM CST.