Using The Product - Philips NORELCO S331 Series Manual

Quick charge

Using the product

2 Place the shaver in the stand in an upright
position making sure charging contacts in
the bottom of stand fit into recess in
bottom of the shaver.
- The display on the shaver will indicate the
shaver is charging.
3 After charging, remove the shaver from the
stand by lifting straight up. Do not tilt the
shaver
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use an
attachment plug adapter of the proper
configuration for the power outlet.
When you start charging the empty battery,
the charging light flashes white quickly. After
approx. 5 minutes the charging light flashes
white slowly. The shaver now contains enough
energy for a 5-minute shave.
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
13
English