Philips NORELCO S331 Series Manual page 19

Cleaning the pop-up trimmer
Always check if the water is too hot, to
prevent burning your hands.
While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence. Internal electric parts are in a
waterproof compartment so the shaver will
be protected against water damage.
1 Turn off the shaver, unplug from outlet and
remove power cord from the product.
2 Press the unit release button to open the
shaving unit.
3 Rinse the shaving unit and hair chamber
with lukewarm water.
4 Rinse the outside of the shaving unit with
lukewarm water.
Never dry the shaving unit with a towel or
tissue, as this may damage the shaving
heads.
5 Carefully shake off excess water and let the
shaver air dry.
6 Close the shaving unit.
Never dry with a towel or tissue, as this may
damage the trimming teeth.
Clean the pop-up trimmer after each use.
19
English