Table of Contents
Advertisement
OPERATIONS
e
Set the cassette tape deck amplifier's POWER switch to ON.
e
Adjust the volume with the VOLUME control and tone with the GRAPHIC
EQUALIZER controls on the cassette tape deck amplifier.
Push the FUNCTION switch in the TAPE position.
Load a pre-recorded cassette securely.
Select the DOLBY
NR switch position.
Push the PLAY switch.
Push the STOP/EJECT switch to stop the tape playback.
a So
SS
RECORDING
1.
Set the FUNCTION
switch to the position corresponding to the recording
program source (CD/VIDEO, TUNER, or PHONO).
Load a non-recorded cassette tape.
Select the DOLBY NR switch position.
Push the REC switch.
Push the STOP/EJECT switch to stop the recording.
aS
oN
NOTE:
Graphic equalizer effects can be added to the speaker output,
but such
effects cannot be recorded on the tape.
Auto Tape Selector
The
purpose
of the auto
tape selector provided on this machine
is to select automatically between normal and metal tapes.
Using the graphic equalizer
By using the five controls on the graphic equalizer, it is possible to boost certain
frequencies and attenuate others. This function can be used to perform precise
tone adjustment not possible with ordinary tone controls. By looking at the posi-
tion of the sliding controls, adjustments to the output spectrum are visible at a
glance. The center (0'') position of each control is the standard setting.
Auto-Stop Mechanism
When the tape is fully wound onto one reel during recording, playback, fast for-
ward,
or rewind,
the auto-stop
mechanism
Operates to release
the tape
mechanism
and bring the tape to a stop without having to press the STOP
switch.
This mechanism
prevents the tape from becoming
stretched
and the pinch
rollers from being deformed.
Erasing the tape
When recording on a previously recorded tape, the previously recorded sounds
|
will be erased and new recording entered on the tape. To erase a previously
recorded tape without recording anew, perform the following operations:
1.
Load the cassette tape.
2.
Push the FUNCTION switch in the TAPE position.
3. Push the REC switch to begin erasing.
Se
ay
Tapa
kd
Fe
B43
x4
©
SESS
b e e e n
A
=
>
Ree
:
FEB
ENEE
:
Sree,
FM AND AM (MW/LW) RECEPTION
1.
Push the FUNCTION
switch in the TUNER
position on the cassette deck
amplifier.
2.
Push the appropriate function switch on the stereo tuner.
3.
Rotate the tuning knob and tune in the desired station.
SEES
SS
N
FM AND
AM
(
Manual Tuning
1.
Push the
FUNCTION
switch in the TUNER
position on the cassette deck
amplifier.
2.
Push the appropriate function switch on the stereo tuner.
3.
Push the TUNING switches (''—" or +}
and tune in the desired station.
Memory tuning
1. Push the FUNCTION switch in the TUNER position on the cassette deck
amplifier.
2.
Push the appropriate function switch on the stereo tuner.
3.
Push the TUNING switches ('"—" or "'+'') to tune in the station you wish to
memorize.
4.
Push the MEMORY switch. During the approximate ten seconds which the
memory
circuit functions,
push the desired
STATION
CALL
switch to
memorize the current frequency in that switch.
5.
Repeat steps 3 and 4 for each STATION CALL switch. The previous memory
will be erased when a new frequency is committed to the memory of the
same STATION CALL switch. An erasure cannot be made without a new in-
put.
@
The electrical circuit controlling the MEMORY function is powered by
a back-up condenser so that the unit will
retain preset stations for a
number of days. If a preset station has been erased, reset it.
Advertisement
Table of Contents
