Parts List; Charging The Battery - Intex ZR100 Manual

4
5
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
REF. NO.
1 VACUUM BODY WITH NON-REPLACEABLE BATTERY
2 FILTER BAG WITH GASKET
3 VACUUM BODY COVER
4 LARGE VACUUM BRUSH HEAD
5 VACUUM NOZZLE
6 MICRO-FILTER BAG
7 VACUUM CHARGING USB CABLE
8 TELESCOPING ALUMINUM POLE
General:
• Plug charger not included. Only use a compatible standard female USB (smartphone or
tablet) plug charger with an output voltage of 5.0-5.2V
• A full charge takes about 5-6 hours: provides about 40-50 minutes of operation.
• Make sure the charging receptacle on the product is dry before any recharging.

Charging the Battery:

1. Connect USB cable to plug charger USB receptacle and plug the charger into the main
electrical outlet.
2. Connect the small end of the USB cable (7) into the vacuum body (1) charging receptacle.
See fig 1. The indicator light will turn red at this time. When fully charged, the indicator
light will turn green. See fig 2.
Note: For the first time use or after a long term storage, the device must be charged for
6 hours before using it.
7
SAVE THESE INSTRUCTIONS
(368IO) RECHARGEABLE HANDHELD VACUUM ENGLISH SIZE: 4.875" X 7.25" 05/25/2023

PARTS LIST

1
2
3
6
DESCRIPTION
Fig 1
8
7
, 1A or more.
1
Page 2
QTY. SPARE PART NO.
1 13349
1 13268
1 13353
1 13351
1 13352
1 13253
1 12269
1 13350
Fig 2
368
IO