Related Manuals for Waterhouse WH5000-D
Summary of Contents for Waterhouse WH5000-D
- Page 1 M A N U A L W H 5 0 0 0 - D D R A I N A G E P U M P FOR REMOVING WATER FROM POOLS, POOL COVERS, PONDS AND FLOODED AREAS.
-
Page 2: Intended Use
W H 5 0 0 0 - D D R A I N A G E P U M P THANKS FOR CHOOSING OUR PRODUCT This smart pump is designed for easy water removal from flat open surfaces like Pool covers, Flat roofs, Flooded Basements, Bathtubs, Kitchen, Shower stalls, etc. INTENDED USE: This smart pump is controlled by an electrical sensor to protect the pump from running dry, instead of a traditional float switch and mechanical vertical switch. This prevents the pump from not working during rollover or dumping. WHY WE LOVE THIS PRODUCT: Automatic Pool Cover Drainage Pump with Intelligent Start-Stop Technology Automatic water level sensor... -
Page 3: Specifications
SPECIFICATIONS ⚠... - Page 4 W ARNING ⚠ Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Do not allow persons to operate or assemble the product until they have read this manual and have developed a thorough understanding of how it works. Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed. Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will be a safer experience and do the job better at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. READ AND FAMILIARIZE YOURSELF WITH THE SAFETY INSTRUCTIONS BEFORE USING THE PUMP Compare the incoming voltage and frequency of your electrical circuit with the data on the model plate.
- Page 5 ⚠ S PECIFIC OPERATION WARNING This pump is not designed to handle salt water, brine, laundry discharge, or any other application which may contain caustic chemicals, highly chlorinated water, and/or foreign materials. DO NOT pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, solvents, thinners, etc. DO NOT use in a flammable and/or explosive atmosphere. ONLY pump clear water. Improper use could result in death or serious injury. If using pump to drain a vessel containing heated water, allow water time to cool to ambient temperature before pumping the water. Failure to do so may cause pump failure or property damage. This pump is not suitable for use with aquatic life. It is not designed to run 24/7 Pump damage or failure could occur if used in these applications and will void the warranty. If using pump to drain a vessel of water make sure the pump is not used while people are in, or in‐contact with the water. ⚠ PLUG EXTENSION CORDS WARNING Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using Protect your extension cords from sharp objects, excessive heat and damp or wet areas As the distance from the supply outlet increases, you must use a heavier gauge extension...
-
Page 6: Warranty
During the time periods and subject to conditions hereinafter set forth, WATERHOUSE will repair or replace to the original user or consumer any portion of your new WATERHOUSE product which proves defective due to material or workmanship of WATERHOUSE contact your nearest authorized WATERHOUSE service station for warranty service. - Page 7 ⚠ B EFORE USE Inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, damaged and any other condition that may affect its safe operation. For best pump performance, unwind the hose before starting the pump. This will help remove any kinks or binds in the hose and allow the unit to pump with less restriction.
-
Page 8: Troubleshooting
⚠ T ROUBLE SHOOTING... - Page 9 WWW.WATERHOUSE.CO.ZA 011 466 8250 | SHOP@WATERHOUSE.CO.ZA CALL US FOR EXPERT ASSISTANCE...