Download Print this page
Waterhouse XC-SP08301 User Manual Manual

Waterhouse XC-SP08301 User Manual Manual

12 volt macerator pump

Advertisement

Quick Links

12 Volt Macerator Pump User Guide Manual
Model: XC-SP08301 MACERATOR PUMP
Product Details
Waterhouse Macerator Pump
Waterhouse Macerator Pump Works well for fish box, live well and holding tank
Works well for fish box, live well and holding tank applications. This Pump is equipped with all
copper motor, so that it will not shock when it is overloaded. It is all wrapped in copper wire to
applications. This Pump is equipped with all copper motor, so that it will not shock when it is
ensure its long lasting. The quality of the motor will determine the lift time of the pump.
1.Pump Head 2 Chambers
2.Open flow 49.2L/min(13GPM)
overloaded. It is all wrapped in copper wire to ensure its long lasting. The quality of the
3.No Pressure
4.2-pin connector with on/off switch
motor will determine the lift time of the pump.
5.inlet/outlet size 2"(50mm)/1"(25mm)
6.12V 24V Motor optional
Specification
• Pump Head 2 Chambers
10/5amp power draw
• Open flow 49.2L/min(13GPM)
49.2 litres per minute maximum flow
2.3Kg weight
• No Pressure
515mm x 420115mm x32mm dimensions
• 2-pin connector with on/off switch
• inlet/outlet size 2"(50mm)/1"(25mm)
• 12V 24V Motor optional Specification

Advertisement

loading

Summary of Contents for Waterhouse XC-SP08301

  • Page 1 Product Details Waterhouse Macerator Pump Waterhouse Macerator Pump Works well for fish box, live well and holding tank Works well for fish box, live well and holding tank applications. This Pump is equipped with all copper motor, so that it will not shock when it is overloaded. It is all wrapped in copper wire to applications.
  • Page 2: Specifications

    10/5amp power draw 49.2 litres per minute maximum flow 2.3Kg weight 515mm x 420115mm x32mm dimensions Caution: Please read all instructions carefully before installing this product. This pump is not ip68 sealed and therefore shall by any means never be submerged. However, the electric wire connections must not be submerged.
  • Page 3 Warning: • To prevent injury, always disconnect the power source when installing or servicing any electric product. • Do not use the pump-to-pump gasoline oil or any flammable liquids. • Always make sure you use fuse amperage rated for your pump model. •...
  • Page 4: Pump Mounting Instructions

    Pump Mounting Instructions: Warning: remove any polystyrene or foam blocks covering the pump around for shipping purposes. • Step 1: make sure you mount the pump facing down or aside on its feet make sure it is holding firmly as to avoid too much vibration that will affect your seals and bearings.
  • Page 5: Operation

    Operation: 1. Connect your -+ terminals accordingly to your battery positive and negative poles. 2. Make sure you have right size fuse on your positive pole. 3. Connect your pump to the control switch, depending on what operation you are using the pump for: •...
  • Page 6 For more information, please feel free to contact us on 011 466 8520 or email us at shop@waterhouse.co.za...