Removing The Antenna Module (White Cable) - Dell VH0W5 Owner's Manual

Removing the antenna module (white cable)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the hard drive, if applicable.
About this task
The following image(s) indicate the location of the antenna module (white cable) and provides a visual representation of the
removal procedure.
Steps
1. Remove the antenna cable from the routing guides on the chassis and system board.
2. Remove the screw (M3x3) that secures the antenna module (white cable) to the chassis.
3. Listen the captive screw that secures the antenna module (white cable) to the chassis.
4. Push the antenna module (white cable) through the slot on the chassis.
5. Lift the antenna module (white cable) off the chassis.
Before working inside your computer.
Removing and installing Field Replaceable Units (FRUs) 73