Axis P3265-V User Manual page 52

AXIS P3265-V Dome Camera
The web interface
• Select configuration: Select a user-defined configuration from the list and adjust the audio encoding settings. The
configurations in the drop-down list act as identifiers/names of the audio encoder configuration.
Audio decoder
• Select configuration: Select a user-defined configuration from the list and adjust the settings. The configurations in
the drop-down list act as identifiers/names of the configuration.
Audio output
• Select configuration: Select a user-defined configuration from the list and adjust the settings. The configurations in
the drop-down list act as identifiers/names of the configuration.
Metadata: Select the metadata to include in your configuration.
• Select configuration: Select a user-defined configuration from the list and adjust the metadata settings. The
configurations in the drop-down list act as identifiers/names of the metadata configuration.
PTZ : Select the PTZ settings for your configuration.
• Select configuration: Select a user-defined configuration from the list and adjust the PTZ settings. The configurations
in the drop-down list correspond to the device's video channels with PTZ support.
Create: Click to save your settings and create the profile.
Cancel: Click to cancel the configuration and clear all settings.
profile_x: Click on the profile name to open and edit the preconfigured profile.
Analytics metadata
Metadata producers
Lists the apps that stream metadata and the channels they use.
Producer: The app that produces the metadata. Below the app is a list of the types of metadata the app streams from the device.
Channel: The channel that the app uses. Select to enable the metadata stream. Deselect for compatibility or resource
management reasons.
Detectors
Camera tampering
The camera tampering detector generates an alarm when the scene changes, for example, when the lens is covered, sprayed
or severely put out of focus, and the time in Trigger delay has passed. The tampering detector only activates when the camera
has not moved for at least 10 seconds. During this period, the detector sets up a scene model to use as a comparison to detect
tampering in current images. For the scene model to be set up properly, make sure that the camera is in focus, the lighting
conditions are correct, and the camera doesn't point at a scene that lacks contours, for example, a blank wall. Camera tampering
can be used as a condition to trigger actions.
Trigger delay: Enter the minimum time that the tampering conditions must be active before the alarm triggers. This can help
prevent false alarms for known conditions that affect the image.
Trigger on dark images: It is very difficult to generate alarms when the camera lens is sprayed, since it is impossible to distinguish
that event from other situations where the image turns dark in a similar way, for example, when the lighting conditions change.
Turn on this parameter to generate alarms for all cases where the image turns dark. When it's turned off, the device doesn't
generate any alarm when the image turns dark.
Note
For detection of tampering attempts in static and non-crowded scenes.
: Select the audio decoding format for your configuration.
: Select the audio output format for your configuration.
52