Axis P3265-V User Manual page 38

Table of Contents

AXIS P3265-V Dome Camera

The web interface

• Time in seconds: Set a time limit for testing the rules. The default time limit is set to 300 seconds. To activate the

rules straight away, set the time to 0 seconds.

• Confirm rules: Confirm the rules and their time limit. If you have set a time limit of more than 1 second, the rules will

be active during this time. If you have set the time to 0, the rules will be active straight away.

Pending rules: An overview of the latest tested rules that you are yet to confirm.

Note

The rules that have a time limit appears both under Pending rules and Active rules until the set time has passed, or until

you confirm them. If you don't confirm them, they appear only under Pending rules, and the firewall falls back to the

previously defined settings. If you confirm them, they will replace the current active rules.

Confirm rules: Click to activate the pending rules.

Active rules: An overview of the rules you are currently running on the device.

: Click to delete an active rule.

: Click to delete all rules, both pending and active.

Custom signed firmware certificate

To install test firmware or other custom firmware from Axis on the device, you need a custom signed firmware certificate. The

certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific

device which is identified by its unique serial number and chip ID. Only Axis can create custom signed firmware certificates,

since Axis holds the key to sign them.

Install: Click to install the certificate. You need to install the certificate before you install the firmware.

The context menu contains:

• Delete certificate: Delete the certificate.

Accounts

Add account: Click to add a new account. You can add up to 100 accounts.

Account: Enter a unique account name.

New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters

(code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.

Repeat password: Enter the same password again.

Privileges:

• Administrator: Has full access to all settings. Administrators can also add, update, and remove other accounts.

• Operator: Has access to all settings except:

• Viewer: Has access to:

All System settings.

Adding apps.

Watch and take snapshots of a video stream.

Watch and export recordings.

Pan, tilt, and zoom; with PTZ user access.

Table of Contents