Advertisement
rp Care and Cleaning
SCORE
e eer e seers
EeesereresereEEteEeHeenEEESROS
Control Panel — clean with a soft, damp cloth.
Cabinet — wipe off any marks with soap and water.
Do not use abrasive substances.
Use an appliance wax once a year if desired.
Tumbler — remove any stains (such as crayon,
Dryer Exhaust System — should be inspected and
ink pen or fabric dye) with an all purpose
cleaned once a year to maintain optimum perfor-
cleaner. Then
tumble old towels or rags to
mance. The outside exhaust hood should be cleaned
remove any excess stain or cleaning substance.
more frequently to ensure proper operation. (Refer to
the Installation Instructions for more information.)
fon
Cees eeseeecereresesesseseressoseeensanaeerses
y D> Replacing Drum Light
(select models)
1) Unplug or disconnect the dryer.
2) Carefully
remove
the bulb from the top
center of the door opening by turning coun-
terclockwise.
3) Replace with a 7 watt, 120 volt candelabra
base bulb (7C7).
4) Reconnect dryer to power supply.
Pe)
SS
Reversing the Door. ooo...
cccccesseeeeteees
The dryer door is designed with the flexibili-
7) Close and open door to check for proper fit of door in
ty to swing from left to right or from right to
the opening. Adjust door if needed.
left depending on your installation needs.
;
8) Insert and tighten remaining screws.
Simply follow these steps:
9) Put hinge & latch hole covers in opposite side.
1) Remove
and
keep
hinge
&
latch
hole
aavere:
HINGE HOLE
2) Rest dryer door on your knee.
3) Remove 4 screws from the door hinges.
4) Turn door upside down
and support on
your other knee.
5) Place a screw in the top hole of the upper
hinge first and tighten to position the door.
6) Insert a screw
in the lower hinge and
tighten.
Advertisement
