Advertisement
Note: The dial can be turned in either direction to select a cycle. Once started, the dial
will not advance at a specific rate during the Auto Dry cycles. At first the dial may not
advance at all. Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly. This is normal operation.
IntelliDry REGULAR automatically senses the moisture
in the load and:shuts off when the selected dryness level
is reached. This cycle is designed for loads such as tow-
els, underwear, t-shirts, jeans, etc. Set the control to the
desired dryness level (more dry — less dry) and press
START. A is the initial preferred setting for the major-
ity of loads.
.
IntelliDry
moredry
REGULAR
less dry
@
elliDry
|
pa OFF
°
'CARE /
less d
ENT PRESS
TIME DRY /
AIR FLUFF
|
Push this button to start the dryer. The
dryer door must be shut for the dryer to
operate. If the door is opened during the
cycle, the start button must be pushed
again to resume the cycle once the door
is closed.
When the cycle is complete, a signal
will sound momentarily.
TIME DRY/AIR FLUFF may be
selected
for any load if the
IntelliDry sensor
system is not
desired. Set the control to the
desired. number of minutes and
choose the appropriate drying
temperature for the load. Press
START.
DAMP DRY is designed to "par-
tially" dry items. It provides
approximately
20 minutes
of
heated tumbling and 5 minutes of
cooldown tumbling without heat.
., WRINKLE
RELEASE _ will
release wrinkles from items that
are clean and dry but slightly
wrinkled. Such as from a crowd-
ed closet or suitcase or from sit-
ting in the dryer too long after
the end of the cycle. It provides
10 minutes of heated tumbling
and 5 minutes of cooldown tum-
bling without heat.
Advertisement
