Additional Functions - Electrolux WB6-50 User Manual

User manual
25

10 Additional functions

Note!
Some of the functions may not be available or active on your machine.
Pause
It is possible to pause an ongoing program.
Press the control knob. A menu will appear on the display. Select PAUSE by turning the control knob and press the
control knob to activate.
When pressing the control knob again the program will continue.
The door can be opened after a short while if the water level is not too high. Close the door and press the control
knob to continue.
Changing a program after start
It is possible to change a program after start.
Press the control knob. A menu will appear on the display. Select CHANGE PROGRAM by turning the control knob and
press the control knob to activate.
When pressing the control knob the program menu will be displayed. Select a new program and start by pressing the
control knob.
Rapid advance
If the machine has this function, it is possible to rapid advance an ongoing program.
Press the control knob. A menu will appear on the display. Select RAPID ADVANCE by turning the control knob and
press the control knob to activate.
When pressing the control knob a list with all program steps will be displayed. Select desired program step from the
list by turning the control knob and press the control knob to activate.
End a program
It is possible to end a program after start.
Press the control knob. A menu will appear on the display. Select END PROGRAM by turning the control knob and
press the control knob to activate.
When pressing the control knob the program will be ended. When the water is drained the door will be unlocked.
Delayed start
At the beginning of start program, it is possible to delay the start of the program.
After program selection, press the control knob. A menu will appear on the display. Turn the control knob to activate
the function. Set the time for the delayed start with the control knob.
Press the control knob to confirm the settings.
Status
Press the control knob. A menu will appear on the display. Select STATUS MENU by turning the control knob and
press the control knob to activate.
The status menu shows the status for water temperature, water level and drum speed for the machine.
Statistics
Press the control knob. A menu will appear on the display. Select STATISTICS by turning the control knob and press
the control knob to activate.
The statistics menu shows total run hours and trip run hours for the machine.
Auto restarts
Press the control knob. A menu will appear on the display. Select AUTO RESTARTS by turning the control knob and
press the control knob to activate.
Set the number of automatic restarts that the machine will perform of the selected program.
Press the control knob to confirm the settings.