Using The Water Dispenser - Beko GN163240XBN User Manual

9.3

Using the Water Dispenser

The first few glasses of water taken
from the fountain will normally be
warm.
If you have not used the water dis-
penser for a long time, dispose of
the first few glasses of water to get
clean water.
1. Press on the arm of the water dis-
penser with your glass. It would be
easier to press on the arm with your
hand if you are using a soft plastic
glass.
2. Release the arm after filling your glass
with water as you desire.
The amount of water flow from the
fountain depends on the pressure
you apply on the arm. Release the
pressure on the arm slightly as the
water level in your glass/container
is increased to prevent overflow.
Water shall drip if you press the
arm slightly; this is normal and it is
not a malfunction.
Filling the water tank of the water dis-
penser
1. Open the lid of the water tank as
shown in the figure. Fill in pure and
clean drinking water. Close the lid.
Water reservoir capacity is 3 litres,
do not overfill.
Cleaning the water tank
1. Remove the water filling reservoir in-
side the door shelf.
EN / 24
EN
DE
FR