By selecting Next you go to the Select the Operator page, while by selecting More you access the Satellite antenna type page if it is
necessary to set the DiSEqC or Unicable.
If you are looking for the LNB list you have to go to General and press OK.
With you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the submenu that allows
you to activate or deactivate the selected satellite and to set its various parameters. After all settings have been made, select Next
to continue.
NOTE:
To con gure the DiSEqC or Unicable parameters it is necessary to select MORE in the previous steps.
Satellite
antenna type
Select
the operator
LNB list
Next
Astra4A/SES5 5E
Eutelsat 7E
Eutelsat 9E
Hotbird 13E
16
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Unicable I
General
vùsat
On
Off
Off
Off