QUANSHENG
Channel Storing----- Menu 26
When the radio on the frequency working and standby mode, input the desired frequency and parameters.
1. Press key O +®, the LCD will displays" SAV**H". (as picture 21).
EON
Piciure 24
2. Press key) or@to choose the channel number.
و ا
ا
key
@ to save or not, the LCD will displays" SAVE?". (as picture 22).
に
تا
Press key
to save again.
w01 136.0250,
.
Example: Channel 3 (same freguency).
Receiving freguency: 466.675MHz
CTCSS:71.9KHz
Transmitting frequency: 466.675MHz
CTCSS: 71.9KHz
Channel 5 (different frequency)
Receiving frequency: 465.575MHz
Transmitting frequency: 460.575MHz
CTCSS: 88.5KHz
First, storing channel 3:
a: The radio on frequency working mode, input key 4, 6, 6, 6, 7. 5ordinal.
b: Press key
O * €&5, and then press keya» to enter the CTCSS mode(see Menu 2).
Press(4④)or〈
ず to choose the receiving CTCSS 71.9, then press key® to confirm.
c: Press key O * &2 , and then press key&ò to enter the CTCSS mode(see Menu 3).
Press @or (wto choose the transmitting CTCSS 71.9, then press key ®to confirm.
d: Press key
"PD +®, and then press @ or
to choose the channel number "SAV.3H".
e: Press key @again to confirm. It doesn't operate the b and c step if you don't set the CTCSS.
Next, storing channel 5:
a: The radio on frequency working mode,input key 4, 6. 5, 5, 7, 5.
b: Press key + &5, and then press key &Ȉto enter the CTCSS mode
c: Press @or@to choose the transmitting CTCSS 88.5, and then press key@ to confirm.
©
26