Table of Contents
Advertisement
QUANSHENG
Fequency Deviation Setting (+/-)----- Menu 4
This function is a way used with repeater or other working stations.
1. On frequency mode, press ©)+@), the LCD displays as picture 4.
2. By operating it repeatedly, you may select frequency deviation mode between (+) (-). Frequency deviation
mode.
a. If trasmitting frequency is higher than receiving frequency , it is normal direction (+).
b. If trasmitting frequency is lower than receiving frequency, it is inverse direction (-).
c. Signal without (+) (-) means it has no setting.
«06 400.025 | Picture 4
3. After setting, the system will confirm automatically
NOTICE A
© Select correct frequency deviation direction according to the station you use.
© This function is invalid under channel status.
VOX Function----- Menu 5
When this function is on, the system will inspect your talking to the microphone and then it will
automatically shift to transmitting mode without manual operation.
This function is more convenient for headset users.
1. On standby mode, press
© + Goto enter, the LCD displays as picture 5.
di
2. Press@orMto choose VOX level, which has levels (OFF-9), OFF.
Picture 5
(1) is the lowest level, (9) is the highest level.
UTEM
3. After setting is finished,press@®to confirm, then the system will automatically
| «01 136.0255. |
return to standby mode. ( LCD displays as picture 6).
Picture 6
16
Advertisement
Table of Contents
