Table of Contents
Advertisement
QUANSHENG
Using this function, you may set deviation between receving and transmitting.
Generally, only repeaters use this. The frequency deviation of this radio is : 0-69.995MHz .
1. On standby mode, press یر + @+ to enter, the LCD displays "0.00000".
2. Press numbers to input the frequency deviation you want to set. If you want to input 5MHz, input 0,5,0,0,0.
3. After setting, press@® . PressCF»orI[PTT
Ito return to standby mode.
NOTICE DAN
© Setting direction of freqeuncy deviation, please see Menu 4.
Busy Channel Lock (BCL)----- Menu 12
When this function is on, you may prevent interrupting other radios that are talking. If the selected channel is
being used by other radios, when you press[PTT], the radio you use will beep, and LCD displays "BUSY".
Release the[PTT], "BUSY" wil disappear and return to receiving mode.
1. On standby mode, press
© + 69 + Gy to enter, the LCD displays "BCL.***".
2. Pressa orMto choose"ON" or "OFF".
3. After setting, pressQ& to confirm, press CĐorIPTTIto return to standby mode
NOTICE ۸/۸
© The turning-on of this function may affect your normal talk.
Time-Out-Timer (TOT)---Menu 13
This function is to limit the continuous long-time transmitting . When the continuous
„os OVER
"
transmitting time exceeds the time you set, the transmitting will be stopped, and you
will hear a beep, LCD displays"
OVER" (as picture 10).
|
Picture 10
20
Advertisement
Table of Contents
