Table of Contents
Advertisement
QUANSHENG
Example: Main channel frequency is 460.125MHz, sub channel frequency is151.235MHz. Want to set dual watch,
operates it as following:
1. On standby mode, press
© +@»to enter, the LCD displays DW (as picture 9).
2. Repeatedly press
(P *(5, you may choose"ON"or "OFF".
D
ات
3. After setting, the system will automatically confirm. At this time, the main and sub
channels have been in dual-watch.
4. If you want to return to standby mode, press £) tœ the LCD will not show "DW".
Picture 9
NOTICE ۸
© If any channel or frequency receives signal, you must reply in 7 seconds. Otherwise the radio will return to
dual-watch mode.
© If sub channel doesn't receive a signal, only the main channel can transmit normally.
© You should exit this function before changing the data and information of other frequencies and channels.
Channel Step (STP)----- Menu 10
Using this function may choose the correspond step frequency to the radio you want to set.
1. On standby mode, Dress(D+QGp+Gy to enter, the LCD displays "STP.**",
2. Press@WorMto choose. There are 5/6.25/10/12.5/15/20/25/30/50/100khz to choose.
3. After setting, press to confirm. PressCDor【PTT】to return to standby mode.
NOTICE ۸
© On channel mode, this function setting is invalid.
Frequency Deviation----- Menu 11
19
Advertisement
Table of Contents
