Storing Tv Channels - Philips VR202 Operating Instructions Manual

STORING TV CHANNELS
@ Check again all the TV channels stored on the TV set.
If necessary repeat the +^" channel adjustment until all
picture disturbances disappear.
© Finally switch off the video recorder pressing button (|).
Selecting the display language,setting the clock and the
date
In order to operate your video recorder easily, you have a choice
of four display languages: English, German, Italian or French.
The correct clock setting is important for carrying out timed
recordings.
And this is how to go about it:
O Press the button (!) to switch the video recorder off.
Now press the button
Press the buttons + or — to select the language indication
of your choice e.g. 'ENGL'.
© Press the button again. The display now shows
TIME'.
Press the buttons + or — to set the time. You may also
use the digit buttons 0-9.
0 Press the button again. The display shows 'YEAR'.
Now set the year.
o Press the button again. The display shows
'MONTH'. Now set the month.
© Press the button again. The display shows 'DATE'.
Set the date.
@ Press the button once again. The setting of the
display language and of the clock is now completed.
0 Press button (!) to switch off the video recorder.
Please note:
• The test picture is displayed on the TV screen during the time
when the Installation procedure is followed.
• You can also set the time and the date on the remote control
and then transmit the data to the video recorder by pressing
button O))).
In chapter 2 you connected your TV set to the video recorder, so
that you may play a cassette. In order to be able to record a TV
programme, you first have to store every TV channel on the
video recorder.
It Is possible to store up to 42 TV channels!
Each TV channel has to get a number.
We advise you to use the same programme numbers for the TV
channels on the video recorder as those on your TV set.
Afterward this will make operating the video recorder a great
deal easier.
The following Is an example in which your TV set has the
association listed below:
TV channel BBC 1 = programme number 1
TV channel BBC 2 = programme number 2
TV channel ITV = programme number 3
video recorder = programme number 8
or
video recorder = programme number 'AV'
If your TV set Is already installed, these associations will already
be stored. Now make the same association on the video
recorder between a TV channel and a programme number.
You have two possibilities:
• If you do not know which channel number corresponds to the
particular TV channel you want to store:
Read the section 'Automatic channel search'.
• If you know which channel number corresponds to the
particular TV channel you want to store:
Read the section 'Direct channel storage'.
Please note: If you store a TV channel on a programme number
that has already been used, the original channel will be deleted.
Automatic channel search
O Switch on the TV set and select the programme number for
the video recorder (in our example number '8* or 'AV').
0 Switch on the video recorder by pressing button ■.
0
Press button Msyinwsi. The video recorder will search for a
TV channel.
The display will show e.g.:
T I I h I O
I U
IM L.
r n ri
o
L-
LI
u
L