Table of Contents
Advertisement
Power outage/power supply failure alarm
When you press the B key again, the power supply failure alarm will be finally deactivated, and the
set temperature for the selected compartment will appear on the B3 display unit.
If the high temperature alarm is activated at the same time, it will operate as described in the chapter
High temperature alarm, after you have deactivated the power supply failure alarm.
If the temperature in the appliance reached the alarm level during the
power outage, then the high temperature alarm will be activated when
power supply is restored. Acoustic alarm will be sounded, and PF will
flash on the display unit B3.
To acknowledge and turn off the acoustic alarm signal, press any key.
The highest measured temperature of the freezer compartment will be
displayed on the B3 display unit, and the B1 symbol will light up.
The next time you press the B key, the highest measured temperature
of the refrigerator compartment will be displayed, and the B2 symbol will
be lit up.
25
Advertisement
Table of Contents
