Table of Contents
Advertisement
Operating the appliance
A. Appliance on/off key
B. Temperature and extra functions settings key
C. Refrigerator compartment temperature display
The signal light above the set temperature display is lit
D. Intensive freezing (fast freeze) function indicator
If intensive freezing (freezer boost) is activated, the signal light above the D symbol will be lit.
E. Eco function indicator
If the Eco function is activated, the signal light above the E symbol will be lit.
To set the appliance temperature or activate the Eco function, press the B key successively. The
indicator cycles through the settings in a circular manner, from right to left. Three seconds after the
key is released, the setting will be stored automatically.
To activate or deactivate intensive freezing (freezer boost), press the B key and hold it for a few
seconds.
Switching the appliance on/off
Adjusting the temperature in the appliance
INFORMATION!
The factory default setting is the recommended temperature of 4 °C. At this setting, the
temperature in the freezer compartment will be around -18 °C.
After the appliance is switched on, it may take several hours for the set temperature to be reached.
Do not place any food into the refrigerator before the temperature drops to the selected setting.
20
Switching the appliance on: To switch on the appliance, press the A
key.
Switching off the appliance: Press the A key again and hold it for 2
seconds. The appliance will be switched off, but it will remain powered.
Advertisement
Table of Contents
