Table of Contents
Advertisement
Installation
4.3. Electrical Connection
WARNING: Do not make
connections via extension
cables or multi-plugs.
WARNING: Damaged power
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side, there should be at
least 4 cm distance between
them.
Our company shall not be liable for any
•
damages that will arise when the
product is used without grounding and
electrical connection in accordance with
the national regulations.
Power cable plug must be within easy
•
reach after installation.
Do not extension cords or cordless
•
multiple outlets between your product
and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes to
improve the cooling system.
Refrigerant with high
temperatures may flow through
these areas, resulting in hot
surfaces on the side walls. This is
normal and does not need any
servicing. Please pay attention
while touching these areas.
4.4. Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for
air circulation between the product and the
wall.
To attach the wedges, remove the
1.
screws on the product and use the
screws provided with the wedges.
Attach 2 plastic wedges on the
2.
ventilation cover as shown in the figure.
Advertisement
Table of Contents
