Indicators.4 - Uniden SUNDOWNER UH-088 Owner's Manual

9. MEMORY CONTROL (MEM) - Places channel numbers into the memory scan list
(OS or GS).
10. TONE SQUELCH CONTROL (TSQ) - Controls Tone Squelched operation (quiet
Mode) on condition that SELCALL option is installed.
Indicators
© © ® ®(^)
EH CAL MEM TSO
© DUP -| GS | If I
©
SRF
-■■■■
SCN-\a~i
888£88mh*
T
LJ
© S
11. Channel Indicator - Indicates the channel number currently selected. On TX
SELCALL usage the Channel Indicator becomes a Memory location indicator.
12. Scan Indicator (SCN) - SCN icon appears when Normal Scan mode is activated.
When Seek Mode Scanning is selected the SCN icon blinks.
13. Priority Indicator (PRI) - Indicates that Priority channel is active when continuously
lit or Flashes when it is regularly being checked for activity while GS scanning.
14. Frequency Indicator - Shows the frequency of the current selected channel.
15. RECEIVE SIGNAL / RF LEVEL Indicator (S / RF) - Indicates the relative signal
strength level when receiving (S) or the relative transmit power (RF) when
transmitting.
16. DUPLEX Indicator (DUP) - The DUP icon appears when duplex operation is
selected.
17. TRANSMIT Indicator (TX) • TX appears when the PTT button on the microphone is
pressed and the radio is transmitting. The RF icon also appears at this time.
18. CALL Indicator (CAL) - The CAL icon appears when the UH-088 radio is called
using SELCALL. It also appears when SELCALL codes are being transmitted.
19. MEMORY Indicator (MEM) - MEM appears when the displayed channel is
programmed either in GS or OS Memory.
20. TONE SQUELCH Indicator (TSQ) - The TSQ icon will appear when the selected
channel is set to operate in Quiet Mode, or flashes when the radio is called usinq
SELCALL.
21. GROUP SCAN Indicator (GS) - The GS icon appears when Group Scan Mode is
activated. Open Scan is indicated by the absence of the GS icon.
4