2.2
Installation Procedures
Please familiarize yourself with the manual contents before beginning the
installation. Use the following recommended steps for installation.
1) Mount the transponder unit to a desired location
2) Mount junction box
3) Install VHF antenna
4) Install GPS antenna
5) Connect all external sensors and data interfaces to the junction box
6) Connect all required cables to the main transponder unit
7) Power on the main transponder unit
8) Complete configuration setting
9) Perform system functional test
2.3
RF Cable Requirements
The following RF cables are recommended to install the M6.
◼
VHF Antenna Cable
Type: RG214, 5D-FB or equivalent
Connector: PL-259 (Male)
◼
GPS Antenna Cable
Type: RG58A/U or equivalent
Connector: TNC (Male)
Cable and connector are supplied as part of the GPS antenna.
8