Advertisement
KRC-949D
MECHANISM OPERATION DESCRIPTION
5. Tape Advance (T.ADV) Mode
Selecting either FF or REW mode while in PLAY mode
causes a plunger (PM801)
to put the unit in T.ADV mode.
The sequence of events in this mode shift is described
here.
The FWD/REW motor is driven to put the unit in PLAY mode again,
and the head mount base is moved in the indicated direction until
point Cc} hits the muting lever so that the head is placed at the T.ADV
position. Further, faces
©
-F and R hold the pinch roller at the
T.ADV
position while faces CB} -F and R respectively hold the FWD
and REV levers at the T.ADV position.
T.ADV link
T.ADV jever (R)
The T.ADV change lever
turns as arrowed.
T.ADV change lever
Pushing the FF or REW button while in PLAY mode turns the
FWD/REV
motor (M801) which pushes the head mount base
via the PLAY gear roller.
:
o-
T.ADV lever (F) turns as arrowed and
is attracted by the plunger PM901.
RMSg01
Muting lever
The muting lever
turns as arrowed.
P
:
Muting
lever
T.ADV torsion spring
9
T.ADV Sever (F}
T.ADV link | The T.ADV link is moved as arrowed
by the T.ADV torsion spring.
25
Advertisement
