IM_D0X7205001-01_EN.book Page 131 Friday, May 19, 2023 9:06 PM
Installation of filter rail and filter
• Please hang the hook of the filter rail on the unit, and then fix it with two screws.
(Please refer to the figure below for installation location)
• Install the filter stopper (hexagonal screw) of the accessory, as shown in the figure below.
• Pictures on this page are only used to illustrate the installation of filter and filter rail. Please see [External
Dimensions] for product appearance.
Under air intake
Filter rail*2
Screw (Accessory)*4
Filter rail
Square hole
Back air intake
Filter rail*2
Screw (Accessory)*4
45-EN
Screw (Accessory)*4
Filter rail*2
Filter stopper
(Accessory)
Filter rail
Fit this hook into the
square hole.
Screw (Accessory)*4
Filter rail*2
Filter stopper
(Accessory)
– 131 –
Insert the filter into the rail in the direction of the arrow as shown in the figure below until it reaches the filter stopper.
Under air intake
Back air intake
Installation location of filter rail
Under air intake
Back air intake
Model type
301 401
561
S02
L02
①
S01
Under air
②
S01
intake
L01
③
S02
S02
④
S02
S02
①
L01
②
Back air
S01
intake
S01
③
S02
L02
④
* Numbers in the above table are shown in the following locations of the rail
801
L02
L01
L02
L02
L01
L02
46-EN