Electrical Configuration - OCEANAIRE OWC Series Engineering, Installation And Service Manual

ELECTRICAL CONFIGURATION

All OWC Series units are equipped with a standard 10-foot long service cord with
plug configurations and receptacle requirements as shown in this chart. Size 18,
24 and 36 single phase units are equipped with LCDI (Leakage Current Detection
& Interruption) devices that serve as a means of electrical protection.
DO NOT USE THE LCDI AS AN ON/OFF SWITCH FOR THE UNIT
All 3-phase models are equipped with locking plugs for added connection
reliability. Refer to the chart below for plug and receptacle details for all OWC
models.
POWER SUPPLY CORD AND NOT REPAIRED
UNIT/MODEL
115 VOLT
OWC1811
208-230 VOLT SINGLE PHASE
OWC2412
OWC3612
208-230 VOLT SINGLE PHASE
OWC6012
208-230 VOLT 3-PHASE
OWC3632
208-230 VOLT 3-PHASE
OWC6032
460 VOLT 3-PHASE
OWC3634
OWC6034
CAUTION
A DAMAGED POWER SUPPLY CORD
MUST BE REPLACED WITH A NEW
PLUG CONFIGURATION
15A-125 VOLT
NEMA 5-15P
20A-250 VOLT
NEMA 6-20P
30A-250 VOLT
NEMA 6-30P
20A-250 VOLT
NEMA L15-20P
30A-250 VOLT
NEMA L15-30P
20A-460 VOLT
NEMA L16-20P
5
RECEPTACLE
NEMA 5-15R
NEMA 6-20R
NEMA 6-30R
NEMA L15-20R
NEMA L15-30R
NEMA L16-20R