General Warnings - Iveco NEF Series Repair Manual

MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
PREMISE
5
NEF G-Drive Stage IIIA SERIES

GENERAL WARNINGS

The warnings shown may not be representative of all the dangerous situations that may occur. Therefore, supervisors
! should be contacted whenever a dangerous situation that has not been described occurs.
Use the specific and generic tools according to the indications in the respective use and maintenance manuals. Check
the working condition and suitability of tools not subject to periodic review.
The manual handling of loads must be assessed in advance since it also depends not only on weight but also on its size
and on the path.
Handling by mechanical means must be with hoisters proper as for weight as well as for shape and volume. Hoisters,
ropes and hooks used must show clear indications regarding maximum acceptable carrying capacity. The use of such
tools is strictly permitted by authorised personnel only. Stay at a safe distance from the load and never below it.
In disassembly operations, always observe the provided prescriptions and prevent any mechanical parts being taken out
from accidentally striking workshop personnel.
Shop activities performed by two technicians must always been executed with caution; avoid operations that may be
dangerous for any collaborators due to lack of field of vision or incorrect position.
Keep any personnel not assigned to the operations clear of working area.
Learn the necessary concepts of operation and safety relating to the vehicle prior to working on it. Scrupulously observe
all safety warnings on the assembly.
Do not leave the assembly in motion unattended during repair work.
When working on an assembly off the ground, make sure that it is resting firmly on the appropriate supporting stands
and that the manual/automatic safety devices are activated in the event of lifting with a hydraulic ramp.
When working on assemblies fuelled with natural gas, in addition to the instructions given in the document, also observe
all the specific safety regulations provided.
Only remove radiator cap when the engine is cold by cautiously unscrewing it in order to let system residual pressure
out.
Flammable fuels and all fluids and liquids must be handled with care, according to the indications provided in the 16 point
cards of harmful materials. Refuelling must be performed outdoors with the engine off, avoiding lit cigarettes, free flames
or sparks, in order to prevent sudden fires/explosions. Adequately store inflammable, corrosive and polluting fluids and
liquids according to what provided by regulations in force. Strictly avoid using containers for food to store harmful liquids.
Avoid drilling or burning pressurised containers and discard cloths impregnated with inflammable substances into
suitable containers.
Worn out, damaged or consumable parts must be replaced with original spare parts.
During workshop activities, always keep the workplace clean; promptly free or clean floors of any accidental spills and
stains of liquids and oils. Electric sockets and electrical equipment necessary to perform repair operations must meet
safety rules.
Print P4D32N009 E Base - March 2014