Mitsubishi Electric M9950 Series Technical Manual page 61

MITSUBISHI
ELECTRIC
3.5.1 Start-up／Shut-down Procedure（Single Module System）
The single-line diagram of single module system is shown in FIGURE 3.8.
Input panel
In this section, the operation started with the status in "Bypass Supply Mode". (Confirm all of the
switches is opened or in tripping position besides 52MB.)
When "REMOTE OPERATION MODE" is displayed on the touch screen,
the inverter start operation can only be performed remotely. If local
!
inverter start operation is required (at the UPS), select "LOCAL ONLY"
or "REMOTE & LOCAL" in the OPERATION MENU.
NOTE
M9950 SERIES UPS
OWNERS / TECHNICAL MANUAL
FIGURE 3.8 ircuit diagram of single module system
C
UPS panel
52RS
52RC
52 R
72B
MITSUBISHI ELECTRIC M9950 SERIES UPS
52PS
*. Only 200kVA UPS with internal maintenance bypass.
Page Number:
3-18
52M
BYP
SW
52L
52C