Advertisement
FUNCTION
ADF
Sensitivity
Without
Auto
Function
With
Auto
Function
Delay
Without
Auto
Function
With
Auto
Function
Shade
Without
Auto
Function
With
Auto
Function
All
Series
Gradient
Without
Auto
Function
With
Auto
Function
4.6.
REPLACING AUTO DARKENING WELDING FILTER
Remove the front protection plate and put the helmet face down. Press both tabs on the top of the filter and push the ADF out.
4.7.
REPLACING THE BATTERIES
Remove the two batteries from the bottom of the cassette. Insert the new batteries the correct way up.
5.
MAINTENANCE
5.1.
CLEANING
Clean with a soft cloth in mild detergent.
9
DO NOT use aggressive solvents such as acetone.
8
5.2.
STORAGE
Store in a clean, dry place, between -10
9
Remove the battery or turn off the ADF before long-time storage.
9
Keep the solar cells of the auto-darkening welding filter in the dark. DO NOT expose to light during storage to maintain power down mode.
9
DO NOT place any heavy items on or inside the helmet. This may damage the electro-optical filter.
8
5.3.
MAINTENANCE
Always check for damage before use. Outer and inner visors should be replaced with genuine certified spare parts.
9
Transport the product in the original packaging away from direct sunlight.
9
We recommend a usage period of 4 years. The period depends on various factors such as use, cleaning, storage and maintenance.
9
© Jack Sealey Limited
OPERATING-UI PANEL
Press
and
.
Press
and
.
Hold
.
Press
and
.
Press
and
.
Hold
.
Press
and
.
Press
and
.
Hold
.
Hold
.
Press
and select DARK mode.
Press
simultaneously, main window locked.
Hold press
, side window locked.
Hold
.
Press
or
.
C-60
C.
o
o
Original Language Version
USAGE
Level 9: for special welding that needs super
sensitivity.
Level 8: for most applications but especially for low
current welding work.
Level 0: only in some specific surrounding lighting
conditions in order to avoid unwanted triggering.
Sensitivity is automatically adjusted with deviation
+2.
Level 9: 2.0s is suitable for most applications,
especially for high amps current application and
longer welding interval.
Level 1 & 2: suitable for spot welding.
Level 0: Tack mode
Delay is automatically adjusted with deviation +2.
Adjust the shade by your experience or according
to chart recommended.
Shade is automatically adjusted with deviation +2.
Shade locked at the desired level.
Offering a gradual recovery from dark to light (not
suitable for tack mode and spot mode).
PWH602
Issue 2
15/02/24
Advertisement
