1. Manuals
  2. Brands
  3. Fujioh Manuals
  4. Hob
  5. FH-ID5130
  6. Operating & installation instructions manual

Fujioh FH-ID5130 Operating & Installation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FH-ID5130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fujioh FH-ID5130

Summary of Contents for Fujioh FH-ID5130

  • Page 2: Table Of Contents

    Content 1. Foreword ..................4 1.1 Safety Warnings ................. 4 1.2 Installation ................4 1.2.1 Electrical Shock Hazard ..........4 1.2.2 Cut Hazard ..............4 1.2.3 Important safety instructions .......... 4 1.3 Operation and maintenance ............5 1.3.1 Electrical Shock Hazard ..........5 1.3.2 Health Hazard ..............
  • Page 3 9.7 Connecting the hob to the mains power supply ......22...

  • Page 4: Foreword

    1. Foreword 1.1 Safety Warnings Your safety is important to us. Please read this information before using your cooktop. 1.2 Installation 1.2.1 Electrical Shock Hazard  Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. ...

  • Page 5: Operation And Maintenance

     Failure to install the appliance correctly could invalidate any warranty or liability claims. 1.3 Operation and maintenance 1.3.1 Electrical Shock Hazard  Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician.

  • Page 6: Important Safety Instructions

    the safety cover is retracted. Use with extreme care and always store safely and out of reach of children.  Failure to use caution could result in injury or cuts. 1.3.5 Important safety instructions  Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite.
  • Page 7 agents to clean your cooktop, as these can scratch the Induction glass.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.  This appliance is intended to be used in household and similar applications such as: -staff kitchen areas in shops, offices and other working environments;...

  • Page 8: Product Induction

    Congratulations on the purchase of your new Induction Hob. We recommend that you spend some time to read this Instruction / Installation Manual in order to fully understand how to install correctly and operate it. For installation, please read the installation section. Read all the safety instructions carefully before use and keep this Instruction / Installation Manual for future reference.

  • Page 9: Before Using Your New Induction Hob

    2.4 Before using your New Induction Hob  Read this guide, taking special note of the ‘Safety Warnings’ section.  Remove any protective film that may still be on your Induction hob. 2.5 Technical Specification FH-ID5130 Cooking Hob Cooking Zones 3 Zones Supply Voltage 220-240V~ 50/60Hz...

  • Page 10: How To Use

    Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a slightly wider energy will be used at its maximum efficiency.

  • Page 11: Finish Cooking

    Select a heat setting by touching the “ up” or “ down” control. • If you don’t choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1. •...

  • Page 12: Timer Control

    To lock the controls Touch the lock control The timer indicator will show “ Lo “ To unlock the controls Touch and hold the lock control for a while. When the hob is in the lock mode, all the controls are disable except the ON/OFF you can always turn the induction hob off with the ON/OFF control in an emergency, but you shall unlock the hob first in the...

  • Page 13: Default Working Times

    b) Setting the timer to turn one cooking zone off Set one zone Touching the heating zone selection control that you want to set the timer for. (e.g. zone 3#) Touch timer control, the minder indicator will start flashing and “10”...

  • Page 14: Cooking Guidelines

    4. Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk. 4.1 Cooking Tips ...

  • Page 15: Heat Settings

    key) has been left on the hob, the hob automatically go on to standby in 1 minute. The fan will keep cooking down the induction hob for a further 1 minute. 5. Heat Settings The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the amount you are cooking.

  • Page 16: Hints And Tips

    Boilovers, melts, Remove these immediately with a fish • Remove stains left by melts and slice, palette knife or razor blade sugary food or spillovers as soon hot sugary spills on scraper suitable for Induction glass as possible. If left to cool on the the glass cooktops, but beware of hot cooking glass, they may be difficult to...

  • Page 17: Failure Display And Inspection

    The induction hob This is caused by the technology This is normal, but the noise should makes a low humming of induction cooking. quieten down or disappear completely noise when used on when you decrease the heat setting. a high heat setting. Fan noise coming from A cooling fan built into your This is normal and needs no action.
  • Page 18 Check whether the fan runs smoothly; if not , replace the fan. No Auto-Recovery Ceramic plate temperature sensor failure- F3/F6 -short circuit. (F3 for 1#,F6 for2#) Ceramic plate temperature sensor Check the connection or replace the F4/F7 failure--open circuit. (F4 for 1#,F7 for2#) ceramic plate temperature sensor.

  • Page 19: Installation

    Heating zones of the same The power board and Check the connection. side ( Such as the first and the display board the second zone ) would connected failure; display “u” . The display board of Replace the display communicate part is board.
  • Page 20 A(mm) B(mm) C(mm) 50 mini 20 mini Air intake Air exit 5mm WARNING: Ensuring Adequate Ventilation Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock during working, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from the bottom of the hob.

  • Page 21: Before Installing The Hob, Make Sure That

    9.2 Before installing the hob, make sure that  The work surface is square and level, and no structural members interfere with space requirements.  The work surface is made of a heat-resistant and insulated material.  If the hob is installed above an oven, the oven has a built-in cooling fan. ...

  • Page 22: Cautions

    TABLE BRACKET Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation (see picture) 9.6 Cautions 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2.
  • Page 23  If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated tools to avoid any accidents.  If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be installed with a minimum opening of 3mm between contacts.

Table of Contents