ViewSonic M10E User Manual page 69

Menu
Power On Source
Power On/Off Ring Tone Enable or disable the power on/off ring tone.
Auto Power On
Smart Energy
Enter the desired input source directly after turning
on the projector.
Direct Power On
Automatically power on the projector when AC
power is supplied, without pressing the Power
button on the projector or the remote control.
CEC
This projector supports the CEC (Consumer
Electronics Control) function for synchronized
power on/off operation via HDMI connection.
That is, if a device that also supports the CEC
function is connected to the HDMI input of the
projector, when the projector's power is turned
off, the power of the connected device will also
be turned off automatically. When the power of
the connected deice is turned on, the projector's
power will be turned on automatically.
NOTE: Ensure both the projector's and the
connected device's CEC function are
turned on.
Auto Power Off
The projector can turn off automatically after a set
period of time once no input source is detected.
Sleep Timer
Turn off automatically after a set period of time.
Power Saving
Lower power consumption if no input source is
detected after five (5) minutes.
NOTE: The power consumption of the LED will
be changed to 30% after no signal is
detected for five (5) minutes.
69
Description