Toro 79501 Operator's Manual page 8

Figure 5
1. Locknut (5/16 inch)
2. Stabilizer bracket
2. Remove the existing 2 bolts, 2 nuts, and hitch
bracket from the bottom of the guard
Figure 6
1. Nut
2. Existing hitch bracket
g467413
3. Bolt (5/16 x 1 inch)
(Figure
g467414
3. Bolt
3. Remove the machine muffler guard (0.06 inch)
and replace it with the muffler guard (0.18 inch)
included in the bagger kit.
4. Install the bagger mount bracket to the machine
as shown in
1. Locknut (5/16 inch)
2. Bagger mount bracket
5. Install the bagger frame to the bagger mount
bracket using the long clevis pin and a hairpin
6).
(Figure 8).
1. Clevis pin
2. Hairpin
8
Figure 7.
Figure 7
3. Bolt (5/16 x 1 inch)
Figure 8
3. Bagger frame
g462069
g462458