SolarMax Yoke Mount OFS Series Installation Instructions

Yoke Mount OFS Series LED SPORTS LIGHT
INSTALLATION INSTRUCTION GUIDE
Read these instructions completely and carefully before proceeding with installation or service maintenance of this product:
Light Fixture
(1 PC) Light Fixture with Yoke Mount
Due to the size and weight of the fixture, we recommend having two technicians to assemble and install any
fixtures. Preform Steps 1-3 (if applicable) on the ground, before moving up the pole to install the fixtures.
www.solarmaxled.com
led@solarmaxtech.com
T: 951-300-0788 ■ F: 909-595-7388
3080 12th St., Riverside, CA 92507
IMPORTANT SAFEGUARDS
• To avoid the possibility of electric shock, turn off power before installation/servicing.
• Installation/maintenance service should be preformed by two (2) qualified electricians.
• Before closing cover of fixture, make sure all wires are inside fixture housing to avoid pinching wires.
• Fixture must be installed in accordance with NEC or local electrical codes by qualified technician.
• For protection, technician should always wear protective goggles and gloves during the installation and maintenance.
• SolarMax LED is not responsible for any damages caused by parts/components that are not supplied by SolarMax LED.
Light Visor
Included Items in Box
Items included may vary based on your order
Fixture & Bracket Parts
B1
(2 PC) M10*4" Hex Bolts
(4 PC) Washers and (2 PC) Nuts
B2
(2 PC) M10*6" Hex Bolts
(4 PC) Washers and (2 PC) Nuts
Power Supply Box
B3
(1 PC) M20*4" Hex Bolt
(2 PC) Washers and (1 PC) Nut
B4
(1 PC) M20*6" Hex Bolt
(2 PC) Washers and (1 PC) Nut
1
Yoke Mount
Light Visor
A1
(4 PC) M5*15mm Hex Socket
(1 PC) Visor (4 PC) Springs and Washers
Safety Strap
(1 PC) Safety Strap
© SolarMax LED, Inc. 2022. All rights reserved.
Spec Sheet is subject to change without notice.
Rev. date: 2023-10-25