Download Print this page

SolarMax OT LED Area Light Series Installation Instructions Manual

Type a slipfitter mount

Read these instructions completely and carefully. Save these instructions for future use.

Before proceeding with installation or service maintenance of this product:

• To avoid the possibility of electric shock, turn o power supply before installation or servicing.

Installation and servicing should be performed by quali ed technician.

• Before closing cover of xture, make sure all wires are inside xture housing to avoid pinching

wires.

• Fixture must be installed in accordance with NEC or local electrical codes.

• For protection, install/service technician should always wear protective goggles and gloves

during the installation and maintenance.

• SolarMax LED is not responsible for any damages caused by parts/components that are not

supplied by SolarMax LED.

STEP 1

Remove (4) bolts from the Slip tter bracket.

STEP 2

Slip the Slip tter onto the tenon.

Secure with (4) hex head bolts.

SolarMax LED | 3080 12th St., Riverside, CA 92507 | (951) 300-0788 | led@solarmaxtech.com

OT Series LED Area Light

Type A Slip tter Mount

Installation Instruction Manual

Torque Force ≥ 8.3M/N.m until locking

Table of Contents

Need help?

Do you have a question about the OT LED Area Light Series and is the answer not in the manual?

Page 1 • Fixture must be installed in accordance with NEC or local electrical codes. • For protection, install/service technician should always wear protective goggles and gloves during the installation and maintenance. • SolarMax LED is not responsible for any damages caused by parts/components that are not supplied by SolarMax LED. STEP 1 Remove (4) bolts from the Slip tter bracket.
Page 2 Torque Force ≥ 71M/N.m until locking socket head screw. Secure at a desired angle. STEP 4 Wire Connection Slip tter with Single Arm Tenon Slip tter with Double Arm Tenon SolarMax LED | 3080 12th St., Riverside, CA 92507 | (951) 300-0788 | led@solarmaxtech.com...