Advertisement
*&*ilT¥II/ASSEMBLY procedure
1.
7s ^
> K<D$l<&5lT/Stand Mounting
■
K^:—
7,
/Stand Base and Base Pipe Assembly
1. Choose the bolt holes in the stand base according to the size of bass drum to be mounted.
3My?Mkb-<B<b*=sn
40-rvg
--(T)IMn-<B<D^VK
BS-750
28-r
32-f'
BS-752/
BS-753
For 36 inch-use bolt hole®
For 40 inch-use bolt hole®
BS-750/
BS-751
For 28 inch—use bolt hole®
For 32 inch—use bolt hole®
2
.
im<DZ\&m7)t+&i£r>zmmzmisbmz<rct?i\
im(D^vyy^m^mz<rc^c
U'jOV^ PT/tXb'yA<D&2&&<njft&ZLt:to
U¥l0(i|l®#3B}
2 Slide the base pipe into the stand base, use supplied hex wrench to firmly tighten all necessary
bolts. Place a supplied cap in the bolts holes not used.
•>K* There are both left and right base pipe sections.
58$ There are both lock side (angle adjustment fixing side) and free side (free rotating side) stand
base assemblies. (See the following page for more details.)
Advertisement
