Set The Sleep Timer; Adjust Display Brightness - Philips DC-291 User Manual

Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
»
If the timer is activated, [
[ AL2] is displayed.
»
If the timer is deactivated, [
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
»
The alarm repeats ringing minutes later.
Tip
• You can press / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
»
The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
AL 1] or
AL1] or
To deactivate sleep timer
1

Adjust display brightness

1
Press SLEEP repeatedly to select a set
period of time (in minutes).
»
When the sleep timer is activated, the
display shows , and the volume will
gradually decrease in the last 5 minutes.
Press SLEEP repeatedly until [OFF] (off)
is displayed.
»
When the sleep timer is deactivated,
disappears on the display.
Press BRIGHTNESS/REP ALM
repeatedly to select different levels of
display brightness.
EN 15