1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove battery if it is exhausted or will not be
used for a long time.
•
Batteries contain chemical substances, so they
should be disposed of properly.
•
Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
Note
•
Before you press any function button on the
remote control, first select the correct source
with the remote control.
Connect power
Caution
•
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
•
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
•
The type plate is located on the bottom of the
main unit.
1
Connect the AC power cord to the wall
outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
»
The hour digits begin to blink.
2
Press OK/
to select the 12/24 hour
format.
3
Press
/
to set the hour.
4
Press SET TIME/PROG to confirm.
»
The minute digits begin to blink.
5
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
•
In 12 hour format, [MONTH--DAY] is
displayed.
•
in 24 hour format, [DAY--MONTH] is
displayed.
Turn on
1
Press POWER.
»
The unit switches to the last selected
source.
Switch to standby
1
Press POWER again to switch the unit to
standby mode.
»
The time and date (if set) appear on
the display panel.
MP3 LINK
FM
ANTENNA
EN
11