Connect Video Cables - Philips CTS4000 Manual

Connect video cables

This section describes how to connect this
Compact Theatre unit to your TV so to enable
viewing of disc play.
Select the best video connection that your TV
can support.
• Option 1: Connect to the HDMI socket
(for a HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the SCART socket
(for a standard TV).
• Option 3: Connect to the Video (CVBS)
socket (for a standard TV).
Note
•
You must connect this unit directly to a TV.
Before you connect
1
Remove the rear cover from this unit.
2
Connect the cables to the corresponding
sockets.
3
Attach the rear cover.
cts4000_12_eng5_final.indd 13 cts4000_12_eng5_final.indd 13
Option 1: Connect to the HDMI
socket
1
Connect a HDMI cable (supplied) from the
HDMI socket on this unit to the HDMI IN
socket on your TV.
Note
•
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tips
•
To optimise the video output, see chapter 'Adjust
settings' > [ Video Setup ] > [ HDMI Setup ] for
details.
•
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter 'Activate EasyLink control' for
details.
•
Use an HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
•
To route the audio from your TV to this Compact
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
•
This type of connections provides best picture
quality.
HDMI IN
EN 13
2008-08-13 6:38:20 PM 2008-08-13 6:38:20 PM