Troubleshooting - Philips CTS4000 Manual

9 Troubleshooting

Main unit
The buttons on this unit do
not work.
Picture
No picture.
No picture on HDMI
connection.
cts4000_12_eng5_final.indd 41 cts4000_12_eng5_final.indd 41
Warning!
•
Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
• Disconnect this unit from the power outlet for a few minutes,
then connect again.
• See TVs manual for correct video input channel selection. Change
the TV channel until you see the DVD screen.
• Press DISC.
• If this happens when you change the TV type setting, you have
to switch to its default mode:
1. Press ç.
2.
Press b.
3. Press SUBTITLE.
• Check if the HDMI cable is faulty. Replace a new HDMI cable.
• If this happens when you change the HDMI video resolution,
you have to switch to its default mode:
1. Press ç.
2.
Press b.
3. Press ZOOM.
EN 41
2008-08-13 6:38:26 PM 2008-08-13 6:38:26 PM